Skip to main content

Pattern Flooring, Supplied and Installed by Mr Floor

Herringbone & Chevron Flooring Melbourne

Two classic parquetry patterns, in a waterproof hybrid plank or in real oak. Learn how herringbone and chevron differ, then choose the range that suits your home.

Herringbone or Chevron? The Patterns

Both patterns are made from rectangular blocks. What changes is how the ends of the blocks are cut and where they meet.

Herringbone

The blocks have square ends. The end of each block meets the side of the next, which gives a staggered zig-zag. It suits living rooms, hallways and open-plan spaces, where the pattern can stand out.

Double herringbone

The same zig-zag, but each step is made of two blocks side by side. The pattern is larger and bolder, so it reads best in a bigger room.

Chevron

The ends of the blocks are cut at an angle, so they meet point to point in a straight line of V shapes. The result is a calmer, more formal look than herringbone.

Planning a Pattern Floor

What to know about laying and choosing before you order.

1

Set Out from a Centre Line

The pattern is set out from a centre line, usually in line with the main doorway or the longest wall, so that it sits square in the room.

2

A Flat, Dry Subfloor

Like all parquetry, herringbone and chevron need a flat, dry subfloor. Engineered blocks are usually glued down. We check the subfloor when we measure.

3

Allow for Extra Material

Pattern floors need more cuts at the walls than straight planks, so allow for extra when you order. Ask us to work out the quantity when we measure.

4

Choose Colour and Scale Together

Light, natural oak tones make the pattern soft and calm; dark or smoked tones make every block stand out. Smaller blocks suit hallways and compact rooms, longer blocks suit open living areas. Compare samples in daylight and at night.

Herringbone & Chevron FAQs

Common questions about pattern flooring.

What is the difference between herringbone and chevron?
In herringbone the blocks have square ends, and the end of each block meets the side of the next, which gives a staggered zig-zag. In chevron the ends are cut at an angle, so the blocks meet point to point in a straight line of V shapes.
Should I choose hybrid herringbone or engineered herringbone?
Both give the same zig-zag pattern. Hybrid herringbone has a timber look printed on a plank with a waterproof rigid core, so it copes with spills and mopping. Engineered herringbone has a top layer of real oak: every block has its own grain, and the surface can be sanded and finished again later.
Which pattern suits a small room or a hallway?
Smaller blocks and narrow planks keep the pattern in scale in a hallway or compact room. The direction matters too: chevron lines along the length of a hall lead the eye forward, and across a room they make it feel wider.
Do herringbone and chevron floors need extra material?
Yes. The pattern needs more cuts at the walls than straight boards, so allow for extra when you order. We work out the quantity when we measure.
How is a herringbone or chevron floor installed?
The blocks go onto a flat, dry subfloor and are usually glued down. The pattern is set out from a centre line so that it sits square in the room. Because the setting out takes care, a pattern floor takes longer to lay than straight boards.
Can I see herringbone and chevron samples before I decide?
Yes. We supply and install across Melbourne, and you can see the ranges at our Thomastown showroom. Book a free measure and quote and we will bring the samples that suit your room.

Herringbone & Chevron Enquiries

Start Your Herringbone or Chevron Floor

Tell us about your room and we will measure it, bring samples and quote, free of charge. Supplied and installed across Melbourne.